High Energy Spark Igniter D-HG 400 高压点火器

Download the D-HG 400 Brochure
(Adobe.pdf file; 0.8MB)

Combustion Automation Units and Flame Monitors
D-GF 55, D-UV 55-10, D-IR 55-10, D-IO 55-10

Download the 55 Series Brochure
(Adobe.pdf file; 0.8MB)

• For intermittent operation

• Low cost combustion automation units and flame monitors without self-check

• Regulation and Monitoring of oil- and gas-burners with intermittent operation

• Simple Installation

• No adjustments required

• Meets the requirements of UL 372 and FM Class 7610

All-In-One Flame Scanner D-LX 100

View the Expanded Specifications

Download the LX 100 Brochure
(Adobe.pdf file; 0.8MB)

• Main application at industrial single burners with continuous or intermittent operation, e.g. in chemical industries, refineries or cement plants

• New semiconductor technology with highest sensitivity replaces UV tube for UV flame detection

• Compact design, flame scanner and amplifier built as one unit, therefore, no space is needed inside a cabinet

• Self-checking and failsafe according to UL 372, FM 7610 as well as EN 230 and EN 298

• Housing meets NEMA 4x (IP 67).

• Relay output contact for direct control of the fuel valve and for status display

• Programmable flame recognition threshold

• Analog output for flame intensity
  0/4 - 20 mA

• Fulfills EMC guidelines IEC 555 and IEC 1000 as well as EN 50 081 and EN 50 082

Flame Sensors D-LE 100/101 and D-LE 600/601

Download the LE 100/101/600/601 Brochure
(Adobe.pdf file; 0.6MB)

• Flame sensors for every spectral range of flame monitoring from
  UV to IR

• Connection to the control units
  D-UG 110 and D-UG 600 and to programming units D-GF 100
  and D-GF 200

• Uniform output signal thus mutually interchangeable
• Adjustable to differing combustion conditions, e.g. combustion of
  waste gas

Flame Scanner Control System D-UG 660

Download the D-UG 660 Brochure
(Adobe.pdf file; 0.4MB)

• Monitoring of flames in the UV and IR range (depending on the flame scanner of the series D-LE 100/D-LE 101 or D-LE 600/D-LE601)

• Sensitivity adjustable in 3 ranges and 100 steps

• Flame intensity displayed in percent

• Pulse frequency indication for flame stability monitoring

• T躒 approved for oil/gas continuous operation for 72 operating hours without capacity limitations
• UL and FM listed

Flame Sensor D-LE 701/703 with
Fiber Optic System D-LL 702/703/704

• Optical flame sensor with fiber optics for various spectral ranges, from UV to IR

• Typical applications include:
  • tiltable bucket burners
  • cylindrical rotary kilns
  • burners with narrow sighting tubes
  • burners with very high ambient temperatures around the sighting tube

  • burners in which the view from the sighting tube is obscured by high particulate levels

• Can be used in conjunction with the D-UG 110/120/660 controllers and D-GF 100/200 combustion automation unit

• Uniform output signal thus mutually interchangeable

• Can be adjusted for different combustion conditions, e.g., flue
  gas recirculation

• Corresponds to current American and European safety requirements for flame monitoring equipment