NOSHOK_Manifold_Valves阀

NOSHOK成立于1967年，是美国首批出售充液压力表的公司之一。更重要的是，NOSHOK是第一家为其压力表提供长达三年的保证期，提升了整个行业的质量基准。先锋的标准完美的追求坚持了逾36年之久。NOSHOK的成功之道是对产品性能及服务的承诺 ，如今应用于整个压力、温度及测力产品的生产线。

NOSHOK 2000/2100 Series Static Pressure Block & Bleed Manifolds Hard & Soft Seat Combine isolating and venting in a single valve, eliminating the need for tubing and fittings Block valve isolates the downstream process fluids and the bleed valve exhausts upstream fluids enabling static pressure transmitters, switches or gauges to be removed without disturbing the permanent piping installation Block valve is located on the left side and the bleed valve is located on top in a 90 orientation, venting is to the right 100% Helium leak tested to 1 x 10-4 ml/s for guaranteed performance and reliability 2000 Series hard seat valves have 10,000 psi pressure rating (@200F maximum) 2100 Series soft seat valves have 6,000 psi pressure rating (@200F maximum) 2100 Series valve also features a replaceable Delrin seat, and straight through porting for bi-directional, high capacity flow and easy roddable cleaning Blow-out proof stem provides a secondary stem seal in the full open position Viton O-Ring and Teflon back-up ring stem seals All 316 stainless steel stems (even in steel valves) for extended service life Stem and bonnet threads are rolled for strength and ease of operation One-piece bonnet with a metal-to-metal seal to the valve body below the bonnet threads Bonnet lock pin to prevent accidental loosening Vinyl bonnet and stem dust cap 0.187 inch orifice size Zinc Nickel plated high tensile strength 4140 steel mounting bolts	NOSHOK 200002/210002 Series & 200402/210402 Series Narrow Block & Bleed Hard & Soft Seat Combines isolating and venting in a single valve, eliminating the need for tubing and fittings Block valve isolates the downstream process fluids and the bleed valve exhausts upstream fluids enabling static pressure transmitters, switches or gauges to be removed without disturbing the permanent piping installation Block valve is located on the left side and the bleed valve is located on top in a 90 orientation, venting is to the right 100% Helium leak tested to 1 x 10-4 ml/s for guaranteed performance and reliability 200002/200402 Series hard seat valves have 10,000 psi pressure rating (@200F maximum) 210002/210402 Series soft seat valves have 6,000 psi pressure rating (@200F maximum) 210002/210402 Series valves also feature a replaceable Delrin seat, and straight through porting for bi-directional, high capacity flow and easy roddable cleaning PTCFE or PEEK soft seat optional Blow-out proof stem provides a secondary stem seal in the full open position Viton O-Ring and Teflon back-up ring stem seals All 316 stainless steel stems (even in steel valves) for extended service life Stem and bonnet threads are rolled for strength and ease of operation One-piece bonnet with a metal-to-metal seal to the valve body below the bonnet threads Bonnet lock pin to prevent accidental loosening Vinyl bonnet and stem dust cap 0.187 inch orifice size
NOSHOK 2602/2702 Series Static Pressure Block & Bleed Mini Manifolds Hard Seat & Soft Tip Combine isolating and venting in a single valve, eliminating the need for tubing and fittings Block valve isolates the downstream process fluids and the bleed valve exhausts upstream fluids enabling static pressure transmitters, switches or gauges to be removed without disturbing the permanent piping installation Valves are located on the top to fit into compact spaces and two holes are provided for mounting, venting is to the left 100% Helium leak tested to 1 x 10-4 ml/s for guaranteed performance and reliability 2602 Series hard seat valves have 10,000 psi pressure rating (@200°F maximum) 2702 Series soft tip valves have 6,000 psi pressure rating (@200°F maximum) Blow-out proof stem provides a secondary stem seal in the full open position Viton? O-Ring and Teflon? back-up ring stem seals All 316 stainless steel stems (even in steel valves) for extended service life Stem and bonnet threads are rolled for strength and ease of operation One-piece bonnet with a metal-to-metal seal to the valve body below the bonnet threads Bonnet lock pin to prevent accidental loosening Vinyl bonnet and stem dust cap 0.141 inch orifice size	NOSHOK 2603/2703 Series & 2604/2704 Series Mini Block & Bleed Manifolds with .156 Inch Orifice Hard Seat & Soft Tip Combine isolating and venting in a single valve, eliminating the need for tubing and fittings Block valve isolates the downstream process fluids and the bleed valve exhausts upstream fluids enabling statis pressure transmitters, switches or gauges to be removed without disturbing the permanent piping installation Block valve is located on the right and the bleed valve is located on top in a 90° orientation, venting is to the left 100% helium leak tested to 1 x 10-4 ml/s for guaranteed performance and reliability 2603/2604 Series hard seat valves have 10,000 psi pressure rating (@ 200°F maximum) 2703/2704 Series soft tip valves have 6,000 psi pressure rating (@ 200°F maximum) 2703/2704 Series valves also feature a replaceable Delrin? seat, and straight through porting for bi-directional, high capacity flow and easy roddable cleaning Blow-out proof stem provides a secondary stem seal in the full open position Viton? o-ring seal and Teflon? back-up ring below the stem threads to protect from corrosion and galling All stem threads are 316 stainless steel All stem threads are rolled for strength and ease of operation One-piece bonnet with a metal-to-metal seal to the valve body below the bonnet threads Bonnet lock pin to prevent accidental loosening Vinyl bonnet and stem dust cap 0.156 inch orifice size
NOSHOK 2020/2120 Series Liquid Level Manifolds Hard & Soft Seat Designed for use with differential pressure transmitters in liquid level applications Available in either single flange or double flange connection for direct installation 100% helium leak tested to 1 x 10-4 ml/s for guaranteed performance and reliability 2020 Series hard seat valves have 10,000 psi pressure rating (@ 200°F maximum) 2120 Series soft seat valves have 6,000 psi pressure rating (@ 200°F maximum) 2120 Series valves also feature a replaceable Delrin? seat, and straight through porting for bi-directional, high capacity flow and easy roddable cleaning Blow-out proof stem provides a secondary stem seal in the full open position Viton? o-ring seal and Teflon? back-up ring below the stem threads to protect from corrosion and galling All stem threads are 316 stainless steel All stem threads are rolled for strength and ease of operation One-piece bonnet with a metal-to-metal seal to the valve body below the bonnet threads Bonnet lock pin to prevent accidental loosening Vinyl bonnet and stem dust cap 0.187 inch orifice size	NOSHOK 3010/3110 Series Standard 3-Valve Differential Pressure Manifolds Hard & Soft Seat Designed for use with differential pressure transmitters incorporating two isolation valves and an equalizing valve in differential pressure measurement Available in block, single flange, or double flange connection for remote or direct installation 100% helium leak tested to 1 x 10-4 ml/s for guaranteed performance and reliability 3010 Series hard seat valves have 10,000 psi pressure rating (@ 200°F maximum) 3110 Series soft seat valves have 6,000 psi pressure rating (@ 200°F maximum) 3110 Series soft seat valves also feature a replaceable Delrin? seat, and straight through porting for bi-directional, high capacity flow and easy roddable cleaning Blow-out proof stem provides a secondary stem seal in the full open position Viton? o-ring seal and Teflon? back-up ring below the stem threads to protect from corrosion and galling All stem threads are 316 stainless steel All stem threads are rolled for strength and ease of operation One-piece bonnet with a metal-to-metal seal to the valve body below the bonnet threads Bonnet lock pin to prevent accidental loosening Vinyl bonnet and stem dust cap 0.187 inch orifice size
NOSHOK 3510 Series Standard Soft Seat with .375 Inch Orifice 3-Valve Differential Pressure Manifolds Designed for use with differential pressure transmitters incorporating two isolation valves and an equalizing valve in differential pressure measurement Available in block, single flange, or double flange connection for remote or direct installation 100% helium leak tested to 1 x 10-4 ml/s for guaranteed performance and reliability Soft seat design has 6,000 psi pressure rating (@ 200°F maximum) Features a replaceable Delrin? seat, and straight through porting for bi-directional, high capacity flow and easy roddable cleaning Blow-out proof stem provides a secondary stem seal in the full open position Viton? o-ring seal and Teflon? back-up ring below the stem threads to protect from corrosion and galling All stem threads are 316 stainless steel All stem threads are rolled for strength and ease of operation One-piece bonnet with a metal-to-metal seal to the valve body below the bonnet threads Bonnet lock pin to prevent accidental loosening Vinyl bonnet and stem dust cap 0.375 inch orifice size	NOSHOK 3610/3710 Series Mini 3-Valve Differential Pressure Manifolds Hard Seat & Soft Tip Compact design is ideal for installations with limited space, such as behind panels or in cabinets Designed for use with differential pressure transmitters incorporating two isolation valves and an equalizing valve in differential pressure measurement 100% helium leak tested to 1 x 10-4 ml/s for guaranteed performance and reliability 3610 Series hard seat valves have 10,000 psi pressure rating (@ 200°F maximum) 3710 Series soft tip valves have 6,000 psi pressure rating (@ 200°F maximum) Blow-out proof stem provides a secondary stem seal in the full open position Viton? o-ring seal and Teflon? back-up ring below the stem threads to protect from corrosion and galling All stem threads are 316 stainless steel All stem threads are rolled for strength and ease of operation One-piece bonnet with a metal-to-metal seal to the valve body below the bonnet threads Bonnet lock pin to prevent accidental loosening Vinyl bonnet and stem dust cap 0.141 inch orifice size
NOSHOK 5030/5130 Series Standard 5-Valve Natural Gas Manifolds Hard & Soft Seat/Tip Designed for use with differential pressure transmitters incorporating two isolation valves, two equalizing valves and a vent valve in natural gas applications Available in block, single flange, or double flange connection for remote or direct installation 100% helium leak tested to 1 x 10-4 ml/s for guaranteed performance and reliability 5030 Series hard seat valves have 10,000 psi pressure rating (@ 200°F maximum) 5130 Series soft seat/tip valves have 6,000 psi pressure rating (@ 200°F maximum) 5130 Series valves also feature a replaceable Delrin? seat, and straight through porting for bi-directional, high capacity flow and easy roddable cleaning on the block valves Blow-out proof stem provides a secondary stem seal in the full open position Viton? o-ring seal and Teflon? back-up ring below the stem threads to protect from corrosion and galling All stem threads are 316 stainless steel All stem threads are rolled for strength and ease of operation One-piece bonnet with a metal-to-metal seal to the valve body below the bonnet threads Bonnet lock pin to prevent accidental loosening Vinyl bonnet and stem dust cap 0.187 inch orifice size Zinc Nickel plated finish on carbon steel valves Electropolish finish on stainless steel valves	NOSHOK 5530 Series Standard Soft Seat with .375 Inch Orifice 5-Valve Natural Gas Manifolds Designed for use with differential pressure transmitters incorporating two isolation valves, two equalizing valves and a vent valve in natural gas applications Available in block, single flange, or double flange connection for remote or direct installation 100% helium leak tested to 1 x 10-4 ml/s for guaranteed performance and reliability Soft seat design has 6,000 psi pressure rating (@ 200°F maximum) Features a replaceable Delrin? seat, and straight through porting for bi-directional, high capacity flow and easy roddable cleaning on the block valves Blow-out proof stem provides a secondary stem seal in the full open position Viton? o-ring seal and Teflon? back-up ring below the stem threads to protect from corrosion and galling All stem threads are 316 stainless steel All stem threads are rolled for strength and ease of operation One-piece bonnet with a metal-to-metal seal to the valve body below the bonnet threads Bonnet lock pin to prevent accidental loosening Vinyl bonnet and stem dust cap 0.375 inch orifice size Zinc Nickel plated finish on carbon steel valves Electropolish finish on stainless steel valves